Polypipe 110mm solvent weld air admittance valve in grey. SPV110G

Product code: POLYPIPE SPV110G

Product information

Polypipe solvent weld air admittance valve for 110mm pipe, also known as a Durgo valve.

The colour is grey.

Why use this?
These valves are designed to reduce the number of vent pipes in a building, which would normally be vented through the roof to atmosphere. When installed, the valves are in the closed position and will prevent foul air escaping from the pipework system in normal atmospheric conditions or when positive pressure is created in the soil stack by the discharge from appliances or fluctuations in pressure within the drainage system.
When negative pressure is encountered, the valve will automatically open and allow air to enter the stack, equalising pressures and therefore preventing loss of water seals in the traps on appliances.

Supplied in polystyrene packaging which doubles as insulation after fitting.

Part number is SPV110G.

These are top quality items not the usual imported rubbish.

Technical specifications

Brand Polypipe
Condition New
Product Code POLYPIPE SPV110G